HY3008T1
Difunctional pure acrylate for low-exotherm LED curing and adhesion improvement.
Product Overview
HY3008T1 is a specialty difunctional pure acrylate designed for low heat release during LED curing, rapid leveling, scratch resistance, alcohol resistance and improved adhesion. It provides outstanding adhesion on selected difficult substrates.
Typical Properties
| Property | Specification | Test Method |
|---|---|---|
| Appearance | Colorless to slightly yellow | H104 |
| Viscosity (cps / 60 °C) | 3,000 - 5,000 | H224 |
| Acid value (mgKOH/g) | ≤ 2.0 | GB/T 6743-2008 |
| Specific gravity (g/cm³) | 0.98 ± 0.02 | GB/T 6750-2007 |
| Refractive index (25 °C) | 1.48 ± 0.005 | GB/T 614-2006 |
| Active content (%) | 100 | Theoretical |
| Functionality | 2 | Theoretical |
6 months. Store sealed at room temperature and protect from light.
Civilian Use & Important Notice
This product and the information on this page are intended solely for lawful civilian applications. Use in military, defense, weapons, warfare, or other prohibited or restricted end uses is not permitted. The information reflects Hanyue Materials’ quality evaluation results and is provided as technical guidance only. Customers remain responsible for incoming inspection, application testing, regulatory compliance and final suitability assessment. No warranty is given for a particular performance or end use, and Hanyue Materials accepts no liability arising from unauthorized, prohibited or improper use.